E3D V6 HotEnd – 1.75mm – 24v – Assembled

This product is currently out of stock and unavailable.

Description

The V6 is E3D’s flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application.

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Key features:

– All metal heatbreak

– Maximum temperature: 285ºC

– Cartridge style heater block

– Groove mount

Kit includes:

– 1 x V6 heatsink 1.75mm

– 1 x V6 heatbreak 1.75mm

– 1 x V6 brass 0.4mm nozzle 1.75mm

– 1 x V6 duct

 1 x V6 aluminium heater block

1 x Heater cartridge  24V

 1 x Thermistor cartridge

 1 x Thermistor extension cable

1 x 30 x 30 x 10 fan 24V

 1 x Thermal compound

 1 x V6 fixings kit

 1 x V6 silicone sock

1 x PTFE tubing 100mm (direct drive version) or 800mm (Bowden version)

Additional information

Dimensions 6 × 4.15 × 2.3 in
Extruder Type

Direct Drive, Bowden

SKU: 9999-115 Category: Tag:

©2024 Fargo 3D Printing

Fargo 3D Printing is not associated with HID Global and their FARGO division.

LEGAL DISCLAIMER

THE PRODUCTS SOLD ON THIS WEBSITE SHOULD ONLY BE USED BY EXPERIENCED INDIVIDUALS, OR UNDER THE DIRECT SUPERVISION OF EXPERTS. NO WARRANTY OF THEIR SUITABILITY FOR ANY PURPOSE WHATSOEVER IS MADE OR OFFERED BY US. YOUR USE OF THE PRODUCTS SOLD ON THIS WEBSITE IS ENTIRELY AT YOUR OWN RISK. YOUR PURCHASE OR USE OF ANY PRODUCT HEREFROM SHALL SERVE AS YOUR EXPLICIT ACKNOWLEDGEMENT THAT YOU UNDERSTAND AND CONSENT TO THE FACT THAT WE HEREBY DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR, ANY HARM, LOSS (ECONOMIC OR OTHERWISE), INJURY OR DEATH RESULTING FROM THE ASSEMBLY OR OPERATION OF OUR PRODUCTS, EITHER AS INSTRUCTED OR OTHERWISE, AND AFFIRM THAT UNDER NO CIRCUMSTANCES SHALL YOU BE ENTITLED TO ANY DAMAGES OF ANY SORT WHATSOEVER RELATED TO YOUR USE OR MISUSE OF OUR PRODUCTS.

Log in with your credentials

Forgot your details?