E3D V6 Nozzle – Brass

$7.50$11.50

Clear

Description

These genuine E3D V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.

Brass nozzles, featuring E3D’s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C.

E3D nozzles are identifiable with markings on the flats of the hex head, please see the table below for identification.

V6_Nozzle_Dot_Chart

Additional information

Weight 0.003125 lbs
Dimensions 1 × 1 × 0.2 in
Nozzle Diameter

0.25mm, 0.40mm, 0.50mm, 0.60mm, 0.80mm

©2020 Fargo 3D Printing

Fargo 3D Printing is not associated with HID Global and their FARGO division.

LEGAL DISCLAIMER

THE PRODUCTS SOLD ON THIS WEBSITE SHOULD ONLY BE USED BY EXPERIENCED INDIVIDUALS, OR UNDER THE DIRECT SUPERVISION OF EXPERTS. NO WARRANTY OF THEIR SUITABILITY FOR ANY PURPOSE WHATSOEVER IS MADE OR OFFERED BY US. YOUR USE OF THE PRODUCTS SOLD ON THIS WEBSITE IS ENTIRELY AT YOUR OWN RISK. YOUR PURCHASE OR USE OF ANY PRODUCT HEREFROM SHALL SERVE AS YOUR EXPLICIT ACKNOWLEDGEMENT THAT YOU UNDERSTAND AND CONSENT TO THE FACT THAT WE HEREBY DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR, ANY HARM, LOSS (ECONOMIC OR OTHERWISE), INJURY OR DEATH RESULTING FROM THE ASSEMBLY OR OPERATION OF OUR PRODUCTS, EITHER AS INSTRUCTED OR OTHERWISE, AND AFFIRM THAT UNDER NO CIRCUMSTANCES SHALL YOU BE ENTITLED TO ANY DAMAGES OF ANY SORT WHATSOEVER RELATED TO YOUR USE OR MISUSE OF OUR PRODUCTS.

Log in with your credentials

Forgot your details?