E3D V6 Titanium HeatBreak Upgrade – 1.75mm

$19.80

Out of stock

Description

V6 titanium HeatBreak

Titanium V6 heatbreaks are the perfect upgrade for printing at higher temperatures, helping to maintain a sharply defined melt zone at higher temperatures.

Genuine E3D heatbreaks feature a refined internal surface finish to reduce extrusion force and improve retraction reliability. Made from grade 5 titanium, these heatbreaks are exceptionally strong and have lower thermal conductivity than stainless steel heatbreaks, allowing you to keep the cold side of your HotEnd even colder.

The increased strength of these breaks means that they are also much less likely to crack or snap, either while hot-tightening or on the occasional collision with printed parts or printer bed.

Please note:

Thermal paste is not supplied with the Heatbreak.

Additional information

Weight 0.003 lbs
Dimensions 1 × 0.5 × 0.25 in
Diameter

Join the waitlist to be emailed when this product becomes available

SKU: 102037 Category: Tag:

©2024 Fargo 3D Printing

Fargo 3D Printing is not associated with HID Global and their FARGO division.

LEGAL DISCLAIMER

THE PRODUCTS SOLD ON THIS WEBSITE SHOULD ONLY BE USED BY EXPERIENCED INDIVIDUALS, OR UNDER THE DIRECT SUPERVISION OF EXPERTS. NO WARRANTY OF THEIR SUITABILITY FOR ANY PURPOSE WHATSOEVER IS MADE OR OFFERED BY US. YOUR USE OF THE PRODUCTS SOLD ON THIS WEBSITE IS ENTIRELY AT YOUR OWN RISK. YOUR PURCHASE OR USE OF ANY PRODUCT HEREFROM SHALL SERVE AS YOUR EXPLICIT ACKNOWLEDGEMENT THAT YOU UNDERSTAND AND CONSENT TO THE FACT THAT WE HEREBY DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR, ANY HARM, LOSS (ECONOMIC OR OTHERWISE), INJURY OR DEATH RESULTING FROM THE ASSEMBLY OR OPERATION OF OUR PRODUCTS, EITHER AS INSTRUCTED OR OTHERWISE, AND AFFIRM THAT UNDER NO CIRCUMSTANCES SHALL YOU BE ENTITLED TO ANY DAMAGES OF ANY SORT WHATSOEVER RELATED TO YOUR USE OR MISUSE OF OUR PRODUCTS.

Log in with your credentials

Forgot your details?