Slice Engineering Hotend Mounting Hardware

$3.99

In stock

Description

Mounting hardware for all Slice Engineering® hotend variants.

Includes:

  • Set (2x) of M2.5×0.45 Length 10 button head socket cap screws for attaching to threaded adapters

  • Set (2x) of washers M2.5 flat washers for connecting to printed adapters with screws above

  • Set (2x) of M2.5×0.45 Length 6 socket head cap screws for attaching Mosquito® Hotend heat sink to Bondtech™ BMG-M

  • Set (2x) of M2.5×0.45 Length 4 socket head cap screws for attaching bottom face of Mosquito® Hotend heat sink to carriage of Delta printers

  • 1x Panduit cable tie for cable control

  • 1x of M2.5×10 button head screw for attaching cable tie to Mosquito® Hotend heat sink

Additional information

Weight .1 lbs
Dimensions 2 × 1 × .25 in
SKU: 102143 Categories: ,

©2021 Fargo 3D Printing

Fargo 3D Printing is not associated with HID Global and their FARGO division.

LEGAL DISCLAIMER

THE PRODUCTS SOLD ON THIS WEBSITE SHOULD ONLY BE USED BY EXPERIENCED INDIVIDUALS, OR UNDER THE DIRECT SUPERVISION OF EXPERTS. NO WARRANTY OF THEIR SUITABILITY FOR ANY PURPOSE WHATSOEVER IS MADE OR OFFERED BY US. YOUR USE OF THE PRODUCTS SOLD ON THIS WEBSITE IS ENTIRELY AT YOUR OWN RISK. YOUR PURCHASE OR USE OF ANY PRODUCT HEREFROM SHALL SERVE AS YOUR EXPLICIT ACKNOWLEDGEMENT THAT YOU UNDERSTAND AND CONSENT TO THE FACT THAT WE HEREBY DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR, ANY HARM, LOSS (ECONOMIC OR OTHERWISE), INJURY OR DEATH RESULTING FROM THE ASSEMBLY OR OPERATION OF OUR PRODUCTS, EITHER AS INSTRUCTED OR OTHERWISE, AND AFFIRM THAT UNDER NO CIRCUMSTANCES SHALL YOU BE ENTITLED TO ANY DAMAGES OF ANY SORT WHATSOEVER RELATED TO YOUR USE OR MISUSE OF OUR PRODUCTS.

Log in with your credentials

Forgot your details?